JNCIP part 1

After SP lab, I will move to JNCIP, the different from SP to JNCIP is the multicast. There is no Multicast in JNCIP, and a little bit QoS in it.

The best book for JNCIP exam of course, The sybex JNCIP study guide.

6 chapters in it. We start from Ch1, the inital config. Since I doesn't know the test netwrok for the exam, But one thing is correct, the Console server. Juniper doesn't have any product function like cisco 2509,2511. So, the ternimal server is connect to the router console port. Make sure you can clear the line and how to exit from the line.

Then OoB is different from cisco also. The cisco 25,26,3600 series routers isn't support OoB interface. And fxp0 acts as OoB for the juniper router. No-readvertise command will not adv this route into any routing protocol.

Accounts, If you dont' want centralise control the account, the local user accoount will control what you can do in the junos. Root just like Freebsd root user. for the first boot router, you need to change password of the root then you can move to next. There is also ops for op dail check. and monitor.

SNMP/NTP, In the modern NOC, The snmp is need as default. Some inetrface usage, link down trap will send by SNMP. Add what clinet can query this router, which cann't.